4 Runner 2WD V6-4.0L (1GR-FE) (2006)
/Page-865007.png)
d. Using SST, push in the bearing cover (outside).
SST 09285-76010
12. INSPECT GENERATOR DRIVE END FRAME BEARING
a. Check the bearing is not rough or worn.
If necessary, replace the bearing.
13. REMOVE GENERATOR DRIVE END FRAME BEARING
a. Remove the 4 screws and retainer plate.
b. Using SST, tap out the bearing.
SST 09950-60010 (09951-00250), 09950-70010 (09951-07100)
