4 Runner 2WD V6-4.0L (1GR-FE) (2006)
/Page-876017.png)
b. Using a screwdriver, install the 4 brushes.
c. Install a new O-ring to the groove of the field frame.
d. Install the end frame with the 2 screws.
Torque: 3.8 N.m (39 kgf.cm, 34 in.lbf)
13. INSTALL MAGNET STARTER SWITCH ASSEMBLY
a. Apply grease to the steel ball, and install it to the clutch shaft hole.
b. Apply grease to the these parts (2)-(5), and install them to the starter drive housing.
