4 Runner 2WD V6-4.0L (1GR-FE) (2006)
/Page-974010.png)
35. INSTALL VANE PUMP V BELT
a. Loosen the belt tension by turning the belt tensioner counterclockwise, and install the belt.
36. CONNECT PRESSURE FEED TUBE ASSEMBLY
a. Install the union bolt with a new gasket on each side of the tube.
Torque: 51 Nm (520 kgf-cm, 38 ft. lbs.)
37. CONNECT OIL RESERVOIR TO PUMP HOSE NO.1
a. Install the hose with the clip.
b. Install the 2 hose with the 2 clip.
38. AIR CLEANER ASSEMBLY
39. ADD POWER STEERING FLUID
40. BLEED POWER STEERING FLUID
41. INSPECT FLUID LEAK
