4 Runner 2WD V6-4.0L (1GR-FE) (2006)
11. INSTALL FRONT STABILIZER BRACKET NO.2 LH
a. Install the front stabilizer bracket No.2 LH with the 2 bolts.
Torque: 40 Nm (410 kgf-cm, 30 ft. lbs.)
12. INSTALL FRONT STABILIZER BRACKET NO. 1 RH
HINT: Install the RH side by following the same procedures with the LH side.
13. INSTALL FRONT STABILIZER LINK ASSEMBLY LH
a. Install the front stabilizer link assembly LH with the 2 nuts.
Torque: 70 Nm (710 kgf-cm, 52 ft. lbs.)
HINT: If the ball joint turns together with the nut, use a hexagon (6 mm) wrench to hold the stud.
14. INSTALL FRONT STABILIZER LINK ASSEMBLY RH
HINT: Install the RH side by following the same procedures with the LH side.
15. INSTALL FRONT WHEELS
Torque: 112 Nm (1,140 kgf-cm, 83 ft. lbs.)