4 Runner 2WD V6-4.0L (1GR-FE) (2006)
/Page-1030007.png)
15. REMOVE FRONT SHOCK ABSORBER BUSH
a. Using SST and a press, remove the absorber bush.
SST 09710-22021 (09710-01071, 09710-01081)
16. INSPECT SHOCK ABSORBER ASSEMBLY FRONT LH
a. Compress and extend the shock absorber rod and check that there is no abnormal resistance or unusual sound during operation. If there is any
abnormality, replace the shock absorber assembly front LH with a new one.
NOTICE: When disposing of the shock absorber assembly front LH, see DISPOSAL.
17. INSTALL FRONT SHOCK ABSORBER BUSH
a. Using SST and a press, install a new absorber bush.
SST 09710-22021 (09710-01071, 09710-01081)
18. INSTALL FRONT COIL SPRING LH
a. Using SST, compress the front coil spring LH.
SST 09727-30021 (09727-00010, 09727-00031), 09727-00060
NOTICE: Do not use an impact wrench. It will damage the SST.
b. Install the front coil spring LH to the shock absorber assembly front LH.
HINT: Fit the lower end of the front coil spring LH into the gap of the spring lower seat.
