4 Runner 2WD V8-4.7L (2UZ-FE) (2003)
Seals and Gaskets: Service and Repair
REPLACEMENT
1. DRAIN DIFFERENTIAL OIL
2. SEPARATE PROPELLER SHAFT ASSY
a. Place matchmarks on the propeller shaft flange and differential flange.
b. 2WD Drive Type: Remove the 4 nuts and 4 washers.
c. 4WD Drive Type:
d. Remove the 4 nuts, 4 bolts and 4 washers.
e. Suspend the propeller shaft assy with wire or similar.
3. REMOVE REAR DRIVE PINION NUT
a. Using SST and a hammer, unstake the nut.
SST 09930-00010
b. Using SST to hold the companion flange, remove the nut.
SST 09330-00021 (09330-00030)
4. REMOVE REAR DRIVE PINION COMPANION FLANGE SUB-ASSY REAR
a. Using SST, remove the companion flange.
SST 09950-30012 (09951-03010, 09953-03010, 09954-03010, 09955-03030, 09956-03030)