4 Runner 2WD V8-4.7L (2UZ-FE) (2003)
5. REMOVE REAR DIFFERENTIAL CARRIER OIL SEAL
a. Using SST, remove the oil seal.
SST 09308-10010
6. REMOVE REAR DIFFERENTIAL DRIVE PINION OIL SLINGER
7. REMOVE REAR DRIVE PINION FRONT TAPERED ROLLER BEARING
a. Using SST, remove the front bearing.
SST 09556-22010
b. Using SST, remove the front bearing outer race.
SST 09308-00010
c. Using a screwdriver, bend the oil strage ring and remove it.
8. REMOVE REAR DIFFERENTIAL DRIVE PINION BEARING SPACER
9. INSTALL REAR DIFFERENTIAL DRIVE PINION BEARING SPACER
a. Install a new rear differential drive pinion bearing spacer.
10. INSTALL REAR DRIVE PINION FRONT TAPERED ROLLER BEARING
a. Using a brass bar and a hammer, install a new oil strage ring.
b. Using SST and a hammer, install the front bearing outer race.
SST 09316-60011 (09316-00011, 09316-00021)
c. Install the front bearing.
11. INSTALL REAR DIFFERENTIAL DRIVE PINION OIL SLINGER
12. INSTALL REAR DIFFERENTIAL CARRIER OIL SEAL
a. Using SST and a hammer, install a new oil seal.
SST 09550-30011
Oil seal drive in depth: 0.7 - 1.3 mm (0.0276 - 0.0512 inch)
b. Coat with oil seal lip with MP grease.