4 Runner 4WD L4-2.7L (3RZ-FE) (1996)
/Page-856001.png)
Throttle Position Sensor: Adjustments
-
Loosen the 2 set screws of the sensor
-
Apply vacuum to the throttle opener
-
Insert a 0.65 mm (0.026 in.) thickness gauge between the throttle stop screw and stop lever.
-
Connect the test probe of an ohmmeter to the terminals IDL and E2 of the sensor.
-
Gradually turn the sensor clockwise the ohmmeter deflects and secure it with the 2 set screws.
-
Recheck the continuity between terminals IDL and E2.
