4 Runner 4WD V6-180.5 2959cc 3.0L SOHC (3VZ-E) (1989)
Mud Flap: Technical Service Bulletins
Body - Mud Guard Installation
REF.: ACCESSORIES
NO: AX94-002
DATE: AUGUST 12, 1994
MODEL: 4RUNNER
4RUNNER FRONT MUDGUARD INSTALLATION INSTRUCTIONS
A front mudguard kit is now available for installation on 1989 through 1995 4Runners. Please make sure all attachment areas are clean and follow the
installation process outlined below.
INSTALLATION PROCEDURE:
Figure 1
1.
Remove capnut, from the stud on the rocker, which is at the base of the front edge, at point "A". Retain capnut for reinstallation (see Figure 1).
Figure 2
2.
Take out 3 body molding screws which secure the fender well trim molding and liner, at points 1, 2 and 3. Retain screws for re-installation (see
Figure 2).