4 Runner 4WD V6-180.5 2959cc 3.0L SOHC (3VZ-E) (1989)
Figure 3
3.
Re-using capnut, install the mudguard on the stud at point "A", while holding mudguard against the body to insure proper fit and tighten down (see
Figure 3).
Figure 4
4.
Re-using body molding screws, install mudguard at point 1, 2, and 3 while holding the mudguard against the body to insure proper fit and tighten
(see Figure 4).
TOOLS REQUIRED:
^ Square Drive Ratchet
^ 10 Millimeter Socket
PART INFORMATION: