toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

ABOUT US
Thermostat Bypass Hose > < Water Pump|Specifications|Page 946

4 Runner 4WD V6-180.5 2959cc 3.0L SOHC (3VZ-E) (1989)

  • Engine, Cooling and Exhaust
  • Cooling System
  • Actuators and Solenoids - Cooling System
  • Hydraulic Cooling Fan Solenoid Valve
  • Component Information
  • Testing and Inspection

Page 1
background image

Hydraulic Cooling Fan Solenoid Valve: Testing and Inspection

Using an ohmmeter, measure solenoid valve resistance. Resistance should be 7.6-8.0 ohms at 77°F. If resistance is not as specified, replace solenoid
valve.

  • Engine, Cooling and Exhaust
  • Cooling System
  • Actuators and Solenoids - Cooling System
  • Hydraulic Cooling Fan Solenoid Valve
  • Component Information
  • Testing and Inspection

Thermostat Bypass Hose > < Water Pump|Specifications|Page 946