4 Runner 4WD V6-180.5 2959cc 3.0L SOHC (3VZ-E) (1989)
/Page-159003.png)
(b) Remove the eleven bolts and No.2 timing belt cover with the three gaskets.
10. Set No.1 cylinder at TDC/Compression.
(a) Turn the crankshaft pulley and align its groove with the "O" mark on the No.1 timing belt cover.
(b) Check that the matchmarks on the camshaft timing pulleys and No.3 timing belt cover are aligned. If not, turn the crankshaft pulley one
complete revolution.
11. Remove crankshaft pulley.
(a) Remove the four bolts and PS belt pulley.
(b) Using SST 09213-58011 and 09330-00021 to hold the crankshaft pulley, loosen the pulley bolt.
(c) Remove SST and pulley bolt.
