4 Runner 4WD V6-180.5 2959cc 3.0L SOHC (3VZ-E) (1989)
/Page-208007.png)
2. INSTALL BOLT WITH WASHER
Torque: 185 kg-cm (13 ft-lb, 18 N.m)
3. APPLY MP GREASE TO INNER HUB SPLINES
4. INSTALL FREE WHEELING HUB COVER WITH NEW GASKET
(a) Set the control handle and clutch to the FREE position .
(b) Place a new gasket in position on the cover.
(c) Install the cover to the body with the follower pawl tabs aligned with the non-toothed portions of the body.
(d) Tighten the cover mounting bolts.
Torque: 100 kg-cm (7 ft-lb, 10 N.m)
