4 Runner 4WD V6-180.5 2959cc 3.0L SOHC (3VZ-E) (1989)
Starter Motor: Service and Repair
NOTE: Some Toyota models have an access plate in the fender well to facilitate starter service. Check for such an access point before
beginning starter service.
1.
Disconnect battery ground cable. Remove battery, battery tray and/or igniter bracket, if necessary.
Remove Electrical Connectors From Starter
2.
Disconnect electrical connectors from starter motor.
3.
Remove air cleaner assembly, if necessary.
4.
On models with automatic transmission, remove transmission oil filler tube if necessary.
5.
Remove starter motor attaching bolts, heat shield (if equipped), then the starter motor.
6.
Reverse procedure to install.