4 Runner 4WD V6-180.5 2959cc 3.0L SOHC (3VZ-E) (1989)
Front Steering Knuckle: Service and Repair
Pre-Installation
Steering Knuckle Replace
1. Replace steering knuckle bushings:
Using a screwdriver, pry out the dust deflector from the steering knuckle.
2. Using SST (09308-00010), pull out the steering knuckle outside bushing.
3. Using a brass bar and hammer, drive out the steering knuckle inside bushing.
4. Using SST and a hammer. tap in a new steering knuckle outside bushing.
SST 09550-10012 (09252-10010, 09555-10010)
Note: When installing the bushing to the spindle, make sure the flat portion of the bushing is aligned with the spindle groove, as shown in the
illustration.