4 Runner 4WD V6-180.5 2959cc 3.0L SOHC (3VZ-E) (1989)
Torsion Bar: Service and Repair
Fig. 9 Exploded View Of Front Suspension Components.
Fig. 10 Removal & Installation Of Torsion Bar Spring
W/4WD
1.
Remove boots, then mark relative position between torsion bar, anchor arm and torque arm, Fig. 9.
2.
Measure protruding bolt end dimension ``A,'' Fig. 10.
3.
Loosen adjusting nut, then remove anchor arm and torsion bar. At rear end of torsion bar there are right and left indication marks that are
not to be interchanged.