4 Runner 4WD V6-180.5 2959cc 3.0L SOHC (3VZ-E) (1989)
/Page-1047006.png)
7. INSTALL INNER HUB AND FREE WHEELING HUB RING IN FREE WHEELING HUB BODY
(a) Insert the inner hub and free wheeling hub ring in the body.
(b) Using a screwdriver install the snap ring.
8. TEMPORARILY INSTALL COVER TO BODY AND CHECK FREE WHEELING HUB
(a) Set the control handle and clutch to the FREE position.
(b) Insert the cover in the body and verify that the inner hub turns smoothly.
(c) Remove the cover from the body.
INSTALLATION OF FREE WHEELING HUB
1. INSTALL FREE WHEELING HUB BODY
(a) Place a new gasket in position on the front axle hub.
(b) Install the free wheeling hub body with six cone washers and nuts. Tighten the nuts.
Torque: 315 kg-cm (23 ft-lb, 31 N.m)
