4 Runner 4WD V6-180.5 2959cc 3.0L SOHC (3VZ-E) (1989)
/Page-806006.png)
(d) Using snap ring pliers, install a new snap ring.
5. ASSEMBLE BOOT TO OUTBOARD JOINT
Before assembling the boot, pack in grease.
HINT: Use the grease (black) supplied in the boot kit.
Grease capacity: 195 - 205 g (0.43 -0.45 lb)
6. ASSEMBLE INBOARD JOINT TO INBOARD JOINT TULIP
(a) Pack in grease to the inboard tulip and boot.
HINT: Use the grease (brown) supplied in the boot kit.
Grease capacity: 270 - 280 g (0.60-0.62 lb)
(b) Align the matchmarks placed before disassembly.
(c) Install the inboard tulip to the drive shaft.
(d) Temporarily install the boot to the inboard tulip.
