4 Runner 4WD V6-180.5 2959cc 3.0L SOHC (3VZ-E) (1989)
/Page-825001.png)
Counter Gear: Service and Repair
REPLACEMENT OF BEARING
IF NECESSARY, REPLACE COUNTER GEAR FRONT BEARING
(a) Using a snap ring pliers, remove the snap ring.
(b) Using SST, press out the bearing.
SST 09950-00020
(c) Replace the side race.
(d) Using a 24 mm socket wrench, press in the bearing and inner race.
(e) Select a snap ring that will allow minimum axial play and install it on the shaft.
