4 Runner 4WD V6-180.5 2959cc 3.0L SOHC (3VZ-E) (1989)
/Page-842003.png)
(b) Measure the clearance between the synchronizer ring back and the gear spline end.
Standard clearance:
0.8 - 1.6 mm (0.031 - 0.063 in.)
Minimum clearance:
0.6 mm (0.024 in.)
If the clearance is less than the limit, replace the synchronizer ring.
5. MEASURE CLEARANCE OF SHIFT FORKS AND HUB SLEEVES
Using a feeler gauge, measure the clearance between the hub sleeve and shift fork.
Maximum clearance: 1.0 mm (0.039 in.)
If the clearance exceeds the limit, replace the shift fork or hub sleeve.
