4 Runner 4WD V8-4.7L (2UZ-FE) (2003)
/Page-1316002.png)
1. INSPECT TELEVISION CAMERA ASSY:
a. Standard signal check
1. Using the tester, measure the voltage and the continuity between terminals.
HINT:
Leave the connector being connected.
2. Using the oscilloscope, check wave forms between terminals.
HINT:
Leave the connector being connected.
The waveform shown is merely an example.
Noise waveform and chattering waveform are omitted.
Standard / Connector T11
Waveform 1
