4 Runner 4WD V8-4.7L (2UZ-FE) (2003)
2.
Disconnect the four hook and loop fasteners located behind the sunshade that secure the roof headlining to the roof.
NOTE:
It is not necessary to remove the headliner to complete this operation.
3.
Measure and cut the tape and felt.
A.
Cut clear tape (P/N 3M SJ6595) and felt (2 mm thick from Noise Kit, P/N 08231-00801) to the sizes shown in the illustration.
B.
Remove release paper from tape.
NOTE:
Do not remove the release paper from the felt.