4 Runner 4WD V8-4.7L (2UZ-FE) (2003)
d. Pull the garnish upward, and remove the pillar garnish from the instrument panel.
e. w/ Curtain shield airbag:
protect the curtain shield airbag LH.
1. Thoroughly cover the airbag with cloth or nylon of 700 mm (27.56 in.) x 120 mm (4.72 in.) and fix the ends of the cover with adhesive
tape, as shown in the illustration.
NOTE: Cover the curtain shield airbag with the protection cover as soon as the front pillar garnish is removed.
32. REMOVE FRONT PILLAR GARNISH RH
HINT: Use the same procedures described above for the LH side.
33. REMOVE INNER REAR VIEW MIRROR ASSY
34. REMOVE ROOF CONSOLE BOX ASSY
a. Using a moulding remover, disengage the 5 claws and 2 clips.
HINT: Tape the screwdriver tip before use.
b. Disconnect the map lamp switch connector and sliding roof switch connector, and remove the console box.
35. REMOVE ROOM LAMP ASSY N0.1