4 Runner 4WD V8-4.7L (2UZ-FE) (2003)
/Page-1433002.png)
Required SSTs
Repair Procedure
1.
Remove the back door trim board.
A.
Remove the assist strap hole cover.
B.
Remove the screw and assist strap.
C.
Using the plastic pry tool, remove the 10 clips and the back door trim cover.
D.
Remove the inner weatherstrip.
2.
Remove and replace the back door ECU.
3.
Install the back door trim board.
A.
Install the inner weatherstrip.
B.
Clip into place the back door trim cover.
