4 Runner 4WD V8-4.7L (2UZ-FE) (2003)
^
Perform the initialization procedure.
D.
Power Sliding Roof (Highlander)
1.
Turn the ignition switch to the "ON" position.
2.
Push and hold the moon roof switch to the "TILT - UP" side until the following cycle of the moon roof operation is completed.
Closing --> Fully tilt up --> Fully tilt down --> Fully slide open --> Fully slide close.
3.
After the cycle of operation above is completed, the initialization is completed.
4.
Check for the "One-touch slide open and close" and "One-touch tilt up and down" functions by pushing the switch briefly to the "SLIDE -
OPEN" and "TILT - UP" sides.