4 Runner 4WD V8-4.7L (2UZ-FE) (2003)
/Page-926005.png)
NOTICE: If pulled out at an angle, there is a possibility that the cylinder bore could be damaged.
16. REMOVE BRAKE ACTUATOR BRACKET NO.1
a. Using a hexagon wrench (5 mm), remove the bolt and brake actuator bracket No.1 from brake master cylinder.
17. REMOVE BRAKE ACTUATOR BRACKET NO.4
a. Remove the bolt and brake actuator bracket No.4 from brake master cylinder.
18. REMOVE BRAKE ACTUATOR TUBE NO.1
a. Using SST, remove the brake actuator tube No.1 from brake master cylinder and brake booster pump assy.
SST 09023-00100
19. REMOVE BRAKE ACTUATOR HOSE
a. Using needle nose pliers, slide the 2 clips and remove the brake actuator hose and 2 clips.
