4 Runner 4WD V8-4.7L (2UZ-FE) (2003)
B.
Remove the 2 nuts and the Skid Control Computer assembly.
C.
Disconnect the skid control buzzer connector and remove the skid control buzzer assembly from Skid Control Computer assembly.
6.
Install Skid Control Computer Assembly.
A.
Install the skid control buzzer on the Skid Control Computer assembly, and connect the skid control buzzer connector.
B.
Install the Skid Control Computer assembly with 2 nuts.
Torque: 5.0 N.m (51 kgf.cm, 44 in..lbf)
C.
Connect the 4 Skid Control Computer assembly connectors.
7.
Install Instrument Panel Junction Block Assembly.