4 Runner 4WD V8-4.7L (2UZ-FE) (2003)
/Page-1186004.png)
d. Using hexagon wrench 14 mm (0.55 in.), install the cap to the cooler condenser assy.
Torque: 2.9 N.m (30 kgf.cm, 25 in.lbf)
9. INSTALL COOLER CONDENSER CUSHION NO.1
a. Install the cooler condenser cushion No. 1 with the 4 bolts.
Torque: 5.4 N.m (55 kgf.cm, 47 in.lbf)
10. INSTALL COOLER CONDENSER CUSHION NO.2
a. Install the cooler condenser cushion No.2 with the 4 bolts and nut.
Torque: 5.4 N.m (55 kgf.cm, 47 in.lbf)
b. Install the cooler condenser bracket No.1 with the nut.
