4 Runner 4WD V8-4.7L (2UZ-FE) (2003)
/Page-1649001.png)
License Plate Lamp: Service and Repair
LICENSE PLATE LAMP BODY
REPLACEMENT
1. REMOVE ASSIST STRAP HOLE COVER
2. REMOVE ASSIST STRAP ASSY
3. REMOVE BACK DOOR TRIM COVER
4. REMOVE BACK DOOR TRIM BOARD
5. REMOVE BACK DOOR GARNISH SUB-ASSY OUTSIDE
6. REMOVE LICENSE PLATE LAMP ASSY
a. Loosen the 4 screws and remove the licence plate lamp assy.
7. REMOVE LICENSE PLATE LAMP LENS
a. Remove the 4 screws and 2 license plate lamp lenses.
8. REMOVE LICENSE PLATE LAMP LENS GASKET
9. REMOVE LICENSE PLATE LAMP BULB
a. Remove the 2 license plate lamp bulbs as shown in the illustration.
10. REMOVE LICENSE PLATE LAMP BODY
