4 Runner 4WD V8-4.7L (2UZ-FE) (2003)
/Page-655003.png)
a. Pinch the projections of the retainer to remove the lock claws and pull out the 2 fuel tank tubes.
NOTE:
-
Check if there is any dirt and/or mud around the connector before this work and clean the dirt away.
-
Be careful of dirt and/or mud because the quick connector has an O-ring to seal the pipe and the connector.
-
Do not use any tool in this work.
-
Do not bend or twist the nylon tube by force.
-
Keep foreign objects off of plug.
-
To protect the tube, cover it with a vinyl bag after checking.
-
When connector and the pipe are stuck, pinch the tube between fingers, and turn it carefully to free and then disconnect the fuel tank tube.
7. DISCONNECT FUEL TANK BREATHER TUBE SUB-ASSY
a. Pinch the projections of the retainer to remove the lock claws and pull out the fuel tank tube.
NOTE:
-
Check if there is any dirt and/or mud around the connector before this work and clean the dirt away.
-
Be careful of dirt and/or mud because the quick connector has an O-ring to seal the pipe and the connector.
-
Do not use any tool in this work.
-
Do not bend or twist the nylon tube by force. Keep foreign objects off of plug.
-
To protect the tube, cover it with a vinyl bag after checking.
-
When connector and the pipe are stuck, pinch the tube between fingers, and turn it carefully to free and then disconnect the tube.
8. DISCONNECT FUEL TANK VENT HOSE
a. Disconnect the fuel tank breather tube from the fuel tank.
1. Push the connector deep inside.
2. Pinch portion A.
3. Pull out the connector.
