4 Runner 4WD V8-4.7L (2UZ-FE) (2003)
Crankshaft Position Sensor: Service and Repair
REPLACEMENT
1. REMOVE ENGINE UNDER COVER ASSY REAR
2. REMOVE CRANK POSITION SENSOR
a. Disconnect the crank position sensor connector.
b. Remove the bolt and crankshaft position sensor.
3. INSTALL CRANK POSITION SENSOR
a. Install crank position sensor with bolt.
Torque: 6.5 N.m (65 kgf.cm, 58 in.lbf)
4. INSTALL ENGINE UNDER COVER ASSY REAR