4 Runner 4WD V8-4.7L (2UZ-FE) (2003)
b. Using SST and a hammer, tap out the bearing.
SST 09950-60010 (09951-00250), 09950-70010 (09951-07100)
11. INSTALL GENERATOR ROTOR BEARING
a. Using SST and a press, press in a new bearing.
SST 09950-60010 (09951-00470), 09950-70010 (09951-07100)
b. Install the bearing retainer with the 4 screws.
Torque: 2.6 N.m (27 kgf.cm, 23 in.lbf)
12. REMOVE GENERATOR DRIVE END FRAME BEARING
a. Using SST, remove the bearing cover (outside) and bearing.
SST 09820-00021
NOTE: Be careful not to damage the tan.
b. Remove the bearing cover (inside).