4 Runner 4WD V8-4.7L (2UZ-FE) (2003)
/Page-975006.png)
c. Place the bearing cover (inside) on the rotor.
13. INSTALL GENERATOR DRIVE END FRAME BEARING
a. Using SST and a press, press in a new bearing.
SST 09820-00031
b. Using SST, push in the bearing cover (outside).
SST 09285-76010
14. INSTALL GENERATOR ROTOR ASSY
a. Place the drive end frame on the pulley.
b. Install the rotor to the drive end frame.
15. INSTALL GENERATOR OIL ASSY
