4 Runner 4WD V8-4.7L (2UZ-FE) (2003)
4WD
If the wheel angles differ from the standard of the specification, inspect the toe-in.
6. INSPECT CAMBER, CASTER AND STEERING AXIS INCLINATION
a. Install the camber-caster-kingpin gauge or position vehicle on wheel alignment tester
b. Inspect the camber, the caster and the steering axis inclination.
Camber, caster and steering axis inclination
2WD Except air suspension
2WD Air suspension
4WD Except air suspension
4WD Air suspension
If the steering axis inclination is not as specified after camber and caster have been correctly adjusted, recheck the steering knuckle and front
wheel for distortion or looseness.