4 Runner 4WD V8-4.7L (2UZ-FE) (2003)
B.
Remove the 2 bolts and separate the pressure feed tube assembly from the frame sub-assembly.
19.
Disconnect the steering gear outlet return tube.
A.
Remove the clip and disconnect the return hose.
B.
Using the 17 mm Union nut wrench (or equivalent), remove the outlet return tube.
20.
Remove the 2 bolts, 2 nuts, and power steering link assembly.
NOTE:
Be sure to only turn the bolt as the nut has a detent.
HINT: