4 Runner 4WD V8-4.7L (2UZ-FE) (2003)
/Page-1092011.png)
a. Using SST, connect the outlet return tube.
SST 09023-12700
Torque: 40 Nm (410 kgf-cm, 30 ft. lbs.) for use with SST
HINT:
-
Use a torque wrench with a fulcrum length of 300 mm (11.81 inch).
-
This torque value is effective in case that SST is parallel to a torque wrench.
b. Install the hose with the clip.
62. CONNECT PRESSURE FEED TUBE ASSY
a. Install the pressure feed tube assy to the frame sub-assy with the 2 bolts.
Torque: 28 Nm (286 kgf-cm, 21 ft. lbs.)
b. Using SST tighten the flare nut and connect the pressure feed tube.
SST 09023-12700
Torque: 40 Nm (410 kgf-cm, 30 ft. lbs.) for use with SST
HINT:
-
Use a torque wrench with a fulcrum length of 300 mm (11.81 inch).
-
This torque value is effective in case that SST is parallel to a torque wrench.
63. FULLY TIGHTEN STEERING INTERMEDIATE SHAFT SUB-ASSY NO.2
64. CONNECT TIE ROD END SUB-ASSY LH
