4 Runner 4WD V8-4.7L (2UZ-FE) (2003)
25.
Install the power steering link assembly into the vehicle with the 2 bolts and 2 nuts. Torque: 100 N.m (1,020 kgf.cm, 74 ft.-lbf)
NOTE:
The nut has a detent, so never turn the nut. Be sure to turn the bolt.
NOTE:
Insert the bolts and position it with the power steering gear assembly as a unit.
Then install the bolts on the frame.
26.
Install the front stabilizer bar.
27.
Install the 2 front stabilizer bar bushings No. 1.
NOTE:
^
Install the bushing to the inner side of the bushing stopper on the stabilizer bar.
^
Install the stabilizer bushing No. 1 as shown in the illustration.
28.
Install the front LH bushing and bracket with 2 bolts.
Torque: 40 N.m (410 kgf.cm, 30 ft.-lbf)
29.
Install the front RH bushing and bracket with 2 bolts.
Torque: 40 N.m (410 kgf.cm, 30 ft.-lbf)