4 Runner 4WD V8-4.7L (2UZ-FE) (2003)
3. SEPARATE FRONT SHOCK ABSORBER WITH COIL SPRING
a. Remove the bolt, nut and washer.
b. Separate the front shock absorber with coil spring from the suspension lower arm.
4. REMOVE FRONT SUSPENSION ARM SUB-ASSY LOWER NO. 1 LH
a. Remove the 2 bolts, and separate the front lower ball joint attachment LH from the front axle.
b. Place matchmarks on the camber adjust cam No.2 and toe adjust cam sub-assy.
c. Remove the nut, camber adjust cam No.2, camber adjust cam assy, bolt, toe adjust cam sub-assy, toe adjust plate No.2 and front suspension
arm sub-assy lower No.1 LH.
d. Remove the cotter pin and the nut.
e. Using SST, remove the front lower ball joint attachment LH.
SST 09628-00011
5. REMOVE FRONT LOWER ARM BUSH NO. 1 LH