4 Runner 4WD V8-4.7L (2UZ-FE) (2003)
STABILIZER BAR FRONT
OVERHAUL
1. REMOVE FRONT WHEELS
2. REMOVE FRONT STABILIZER LINK ASSY LH
a. Remove the 2 nuts and the front stabilizer link assy LH.
HINT: If the ball joint turns together with the nut, use a hexagon (6 mm) wrench to hold the stud.
3. REMOVE FRONT STABILIZER LINK ASSY RH
HINT: Remove the RH side by following the same procedures with the LH side.