4 Runner 4WD V8-4.7L (2UZ-FE) (2003)
/Page-869001.png)
Transmission Speed Sensor: Service and Repair
SPEED SENSOR REPLACEMENT
1. REMOVE SPEED SENSOR (SP2 and NT SENSOR)
a. Disconnect the connector.
b. Remove the bolt and speed sensor.
2. INSTALL SPEED SENSOR (SP2 and NT SENSOR)
a. Coat a new O-ring with ATF.
b. Install the speed sensor with the bolt.
Torque: 5.4 Nm (55 kgf-cm, 48 inch lbs.)
c. Connect the connector.
