4 Runner Limited 2WD V6-3.4L (5VZ-FE) (1997)
(b) Place the plate between the pistons and insert a pad at one side.
(c) Use compressed air to remove the pistons alternately from the cylinder.
WARNING: Do not place your fingers in front of the piston when using compressed air.
3. Remove piston seals.
Using a screwdriver, remove the 4 piston seals from the cylinder.
REASSEMBLY
Reassembly is in the reverse order of disassembly.
CAUTION:Apply lithium soap base glycol grease to the parts indicated by arrows in EXPLODED VIEW.