4 Runner Limited 2WD V6-3.4L (5VZ-FE) (1997)
Piston: Service and Repair
Removal
1. Remove piston and connecting rod assemblies.
(a)
Using a ridge reamer, remove the all carbon from the top of the cylinder.
(b) Cover the connecting rod bolts with a short piece of hose to protect the crankshaft from damage.
(c)
Push the piston, connecting rod assembly and upper bearing through the top of the cylinder block.
NOTE:
^
Keep the bearings, connecting rod and cap together.
^
Arrange the piston and connecting rod assemblies in correct order.