4 Runner Limited 2WD V6-3.4L (5VZ-FE) (1997)
(d) Remove the bolt and nut, and disconnect the PS pump from the engine.
5. w/ A/C: Disconnect A/C compressor from engine.
(a)
Disconnect the A/C compressor connector.
(b) Remove the drive belt.
(c)
Remove the 4 bolts, and disconnect the A/C compressor from the engine.
6. Loosen fan with fluid coupling and fan pulleys.
7. Remove drive belt for generator.
8. Remove No. 2 fan shroud.
9. Remove fan with fluid coupling and fan pulleys.
10. w/ A/C: Remove A/C compressor bracket.
Remove the 5 bolts and A/C compressor bracket.
11. Remove oil dipstick and guide.
Remove the bolt, oil dipstick, guide and O-ring.
12. Remove No. 2 timing belt cover.
(a)
Disconnect the 4 high-tension cord clamps from the No. 2 timing belt cover.
(b) Remove the 6 bolts and No. 2 timing belt cover.
(c)
Disconnect the camshaft position sensor connector.