4 Runner Limited 2WD V6-3.4L (5VZ-FE) (1997)
Blower Motor: Service and Repair
Front Blower Motor
REMOVAL
1. REMOVE GLOVE COMPARTMENT PARTS
2. REMOVE BLOWER MOTOR
a. Disconnect the connector.
b. Remove the 3 screws and motor.
INSTALLATION
Installation is in the reverse order of removal.
INSPECTION
INSPECT BLOWER MOTOR OPERATION
Connect the positive (+) lead from the battery to terminal 2 and the negative (-) lead to terminal 1, then check that the motor operations smoothly.
If operation is not as specified, replace the blower motor.