toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Evaporative Vapor Pressure Sensor > < Evaporative Emission Control Canister|Testing and Inspection
Page 2
background image

(e) While holding port F closed, apply vacuum (2.94 kPa, 22 mm Hg, 0.87 in.Hg) to port D,check that the vacuum does not decrease when port C

is closed, and check that the vacuum decreases when port C is released.
If a problem is found, replace the charcoal canister

Evaporative Vapor Pressure Sensor > < Evaporative Emission Control Canister|Testing and Inspection