4 Runner Limited 2WD V6-3.4L (5VZ-FE) (1997)
/Page-1232003.png)
6. Remove intake manifold assembly.
7. Remove water bypass pipe and knock sensor wire.
8. Remove knock sensors.
Using SST; remove the knock sensor. SST 09817-16011
INSTALLATION
1. Reinstall knock sensors.
Using SST, install the knock sensor. SST 09817-16011
Torque: 39 N.m (400 kgf.cm, 29 ft.lbf)
2. Reinstall water bypass pipe and knock sensor wire.
3. Reinstall intake manifold assembly.
4. Reinstall fuel pressure regulator.
5. Reinstall intake air connector.
6. Reinstall No.2 timing belt cover.
7. Reinstall air cleaner hose.
8. Refill with engine coolant.
9. Recheck engine coolant level.
