4 Runner Limited 2WD V6-3.4L (5VZ-FE) (1997)
Camshaft Position Sensor: Testing and Inspection
Camshaft Position Sensor Inspection
1. Disconnect camshaft position sensor connector.
2. Inspect camshaft position sensor resistance.
Using an ohmmeter, measure the resistance between terminals.
Resistance:
Cold: 835-1400 ohms
Hot: 1,060-1645 ohm
If the resistance is not as specified, replace the camshaft position sensor.
See: Service and Repair
3. Reconnect camshaft position sensor connector.