4 Runner Limited 2WD V6-3.4L (5VZ-FE) (1997)
Starter Relay: Testing and Inspection
INSPECTION
Starter Relay (3RZ-FE)
1. REMOVE STARTER RELAY
2. INSPECT STARTER RELAY CONTINUITY
a. Using an ohmmeter, check that there is continuity between terminals 1 and 2.
If there is no continuity, replace the relay.
b. Check that there is no continuity between terminals 3 and 5.
If there is continuity, replace the relay.
Relay Operation (5VZ-FE)
3. INSPECT STARTER RELAY OPERATION
a. Apply battery voltage across terminals 1 and 2.
b. Using an ohmmeter, check that there is continuity between terminals 3 and 5.
If there is no continuity, replace the relay.
4. REINSTALL STARTER RELAY