4 Runner Limited 2WD V6-3.4L (5VZ-FE) (1997)
/Page-1975002.png)
b. Remove the two brackets and bushings from the stabilizer bar.
Installation Hint: Install the bushings to the stabilizer bar so that the cutout of the bushings faces the front of the vehicle.
4. Remove the stabilizer bar links by holding the stabilizer bar link, remove the nuts, retainers and bushings.
NOTE: When installing the links, tighten the nuts to 19 Nm (14 ft. lbs.).
INSTALLATION
Install in the reverse order of removal.
