4 Runner Limited 2WD V6-3.4L (5VZ-FE) (1997)
INSPECTION
1. Inspect the shock absorber by compressing and extending the shock absorber rod and check that there is no abnormal resistance or unusual
operation sounds.
2. If there is any abnormality, replace the shock absorber with a new one.
3. When discarding the shock absorber, use the following procedure.
Bushing Replacement
BUSHING REPLACEMENT
1. Using 09506-35010 09632-36010 Special Service Tool (SST) and a press, remove the bushing.
2. Using the 09506-35010 SST and a press, install a new bushing.
NOTE: Do not apply grease or oil to the bushing.